I finally choose to finish one of my latch hook rugs as a pillow cushion. Here's what I did. After finishing the latch hook rug, I trimmed off the excess canvas, leaving 4 empty rows to work with. Next, I measured the latch hook rug and added 4 inches to the length and width. I used these new measurements to cut a piece of fabric for the backing.Once I was ready to attach the fabric to the latch hook rug, I folded the edges of the fabric over 3/4 of an inch. I then pinned the fabric to the latch hook rug, making sure to match up the right sides of both the material and the rug together. Once that was done, I sewed the two pieces together by hand, placing one stitch in every square on the latch hook canvas.
After I had sewn together three of the edges (I left one of the sides unstitched), I turned the piece inside out. I filled it with stuffing, until the pillow was soft and fluffy. Finally, I sewed the remaining side shut, being careful to keep the edges tucked in. Now my latch hook pillow is happily on display on a chair in my living room!
If you liked this project, you can find more FREE Project Ideas on my website. Try them out and leave a comment on my blog - I'd love to hear from you!
This was very interesting. Gosh I haven't done a latch hook for years, its made me want to go and find my hook! Suzie. x
ReplyDeleteI liked it, you can find more Bedding Pillow for decorating your bedroom in a modern way.
ReplyDeleteI am making a 12x12 canvas latch hook care bear that I wanted to make into a pillow, but I am afraid it will be SO heavy that it won't hold up as a throw pillow, any ideas?? I would GREATLY appreciate anything you can suggest!
ReplyDeleteI Found so many beautiful ethnic middle eastern rug pillows and kilim pillows at http://www.rugpillows.com
ReplyDelete